ICE 1423C Hydraulic Vibrator Crane Suspended High Frequency Hydraulic Vibrator Eccentric Moment: 14kgm Max. Centrifugal Force: 810kN Total Weight: 3240 kgs Single Grip 30m Hoses Wander Lead Machine Fully Checked and Serviced ICE 330 PowerPack 1999 CAT 3306DITA Diesel Engine Approx. 485 hours Hydraulic manifold has dual flow system and Forward and Reverse switches on the Pendent and Control Panel
Manufacturer: ICE
Model: 1423C
Year: 1999
Hours: 485
These leaders were used with the NCK Ajax crawler crane – 60 ton crawler crane. We have 2 sets in our yard. These could be used for cast in situ piles or precast piles. We would need to supply a third winch as with a normal crawler crane you would only have the main and auxillary winch. We could supply a third winch if required. 26m Leader CAT head - 2.5m long x 900mm x 900mm - Estimated weight 2,000kgs 1 x 12m leader intersections are 11.97m long x 900mm x 900mm - Estimated weight 3,000 kgs each 1 x bottom leader that is 12.03m long x 900mm x 900mm - Estimated weight 3,000 kgs 1 x 2m leader intersection are 2.0m long x 900mm x 900mm - Estimated weight 1,000 kgs each Leader Foot Saddle to secure back to the machine 4ton drop hammer Helmet to suit The rig was used on a NCK Ajax C60 - 60ton crawler crane
Manufacturer: 26m Leader Attachment
Model: -
Year: -
Hours: -
Watson 5000 Crane Attached Drilling Rig 5 units available Mid 1980's 13,300kgm Torque 30m Drill depth ( will supply kelly bar including swivel suitable to drill to 30m) This can be easily extended. The Kelly bar on a Watson is square section bar. We have a kelly bar 2 section 17m kelly bar G.M 6V53 Water cooled Allison MT-653 Transmission C/W Frame Machines are in good working condition.
Manufacturer: Watson
Model: Watson 5000 Crane Attached Drilling Rig
Year: 1980
Hours: -
